Slip on Flanges

Slip on Flanges Manufacturers, Slip on Flanges Exporters, Slip on Flanges Stockists, Slip on Flanges Suppliers, Slip on Flanges Manufacturers In Mumbai, Slip on Flanges Exporters In Mumbai, Slip on Flanges Stockists In Mumbai, Slip on Flanges Suppliers In Mumbai

Slip on Flanges Manufacturers In India, Slip on Flanges Exporters In India, Slip on Flanges Stockists In India, Slip on Flanges Suppliers In India, Slip on Flanges Manufacturers In Mexico, Slip on Flanges Exporters In Mexico

Slip on Flanges Stockists In Mexico, Slip on Flanges Suppliers In Mexico, Slip on Flanges Manufacturers In UAE, Slip on Flanges Exporters In UAE, Slip on Flanges Stockists In UAE, Slip on Flanges Suppliers In UAE

We are tended to basic authority in  making raised need nature of Slip-on ribs. Slip-on pipe spines when in doubt slips over the pipe. Slip on pipeflanges are routinely made up in the relationship of an inside broadness of the pipe ribs that is more obvious than the outside width of the pipe somewhat. This engages the Slip on ribs to truly slip over the pipe.

Slip on pipe spines are joined, all around both outside and inside, to offer quality and stop spillage. Slip on pipe ribs can once in a while also have a ring/boss or a point of affiliation, and can be made up by strategies for a drag to run well with either chamber or pipe. In the interim, focus pipe spines and ring channel ribs are both perceived as slip on pipe ribs, for the explanation that them two slip over the pipe.

We proffer slip-on pipe spines that are being made dealing with everything relationship to relationship in a level of endeavors including power time, shipbuilding, petrochemical plants, waste water treatment plants, oil taking care of plants, paper creation lines, turnkey attempts and pharmaceutical plants among others.

METALICA FORGING INC. is Manufacturers and Suppliers of Slip on Flanges. We meticulously clung to ANSI/ASME B16.9 making models. These spines are basically furnished with a raised face. These Flanges contain a ring which is resolved to a pipe end. This pipe end interfaces with the spine face inside some parcel; such a procedure awards applying weld address the insider partition over.

Lower material expense with direct course of action makes Slip on Flanges unavoidable stood apart from weld neck rib. Precisely when Type B or Type C stub closes are used, Slip on Flanges can be changed over into a lap joint spines. A touch of the gauges are API-605, MSS SP44, ANSI B16.47 Series An and B, ANSI B16.5, ASA, EN1092, BS 4504, DIN.

The figured quality from a Slip On spine under inside weight is of the mentioning of 66% that of Welding Neck ribs, and their life under exhaustion is around 33% that of the last referenced.

The relationship with the pipe is done with 2 filet welds, too at the outside as moreover at inside the spine. The X measure on the image, are generally: Divider thickness of pipe + 3 mm. This space is fundamental, to don't hurt the spine go confronting, in the midst of the welding technique.

A balancing activity of the spine is, that standard for each condition truly off the bat a pipe must be welded and after that solitary a fitting. A blend of spine and elbow or rib and tee is unbelievable, considering the way wherein that named fittings have not a straight end, that whole slid in the Slip On rib.

Specification

Standards: ANSI B16.47 Series A & B, ANSI B16.5, API-605, MSS SP44, ASA, EN1092, BS 4504, DIN
Type: Slip on Flanges / SORF
Size:  ½” (15 NB) to 48″ (1200NB)
Class : 150 Class, 300 Class, 400 Class, 600 Class, 900 Class, 1500 Class, 2500 Class, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Material: Stainless Steel, Duplex, Super Duplex, Nickel Alloys, Alloy Steel, Carbon Steel, Low temperature Steel
Material Grade:
Stainless Steel Slip on Flanges:  ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Duplex & Super Duplex Steel Slip on Flanges: ASTM A182 / ASME SA182, F 44, F 45, F51, F 53, F 55, F 60, F 61
Carbon Steel Slip on Flanges: ASTM A105 / ASME SA105, ASTM A350 / ASME SA350, ASTM A181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70
Low Temperature Carbon Steel Slip on Flange (LTCS SORF): Flange, A350 LF2/A350 LF3
Alloy Steel Slip on Flanges:  ASTM A182 / ASME SA182 & A387 F1, F5, F9, F11, F12, F22, F91
Nickel Alloy Slip on Flanges:  ASTM / ASME SB 564 / 160 / 472, UNS 2200 ( Nickel 200 ), UNS 2201 (Nickel 201 ), UNS 4400 (Monel 400 ), UNS 8020 ( Alloy 20 / 20 CB 3, UNS 8825 Inconel (825), UNS 6600 (Inconel 600 ), UNS 6601 ( Inconel 601 ), UNS 6625 (Inconel 625), UNS 10276 ( Hastelloy C 276 )

MATERIAL GRADE of Slip on Flanges

Stainless Steel Slip on Flanges –  ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Duplex Steel Slip on Flanges –  ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

Carbon Steel Slip on Flanges –   ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Low Temperature Carbon Steel Slip on Flanges –  ASTM A350, LF2, LF3

Copper Alloy Slip on Flanges –  ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200

Alloy Steel Slip on Flanges –  ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91

Nickel Alloy Slip on Flanges –  ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)

SOME OF ITS APPLICATIONS ARE :

Petrochemical plants
Control time
Oil refineries
Paper industrial facilities
Misuse water treatment plants
Shipbuilding
Turnkey exercises
Pharmaceutical plants