Socket Weld Flanges

Socket Weld Flanges Manufacturers, Socket Weld Flanges Exporters, Socket Weld Flanges Stockists, Socket Weld Flanges Suppliers, Socket Weld Flanges Manufacturers In Mumbai, Socket Weld Flanges Exporters In Mumbai, Socket Weld Flanges Stockists In Mumbai, Socket Weld Flanges Suppliers In Mumbai

Socket Weld Flanges Manufacturers In India, Socket Weld Flanges Exporters In India, Socket Weld Flanges Stockists In India, Socket Weld Flanges Suppliers In India, Socket Weld Flanges Manufacturers In Mexico, Socket Weld Flanges Exporters In Mexico

Socket Weld Flanges Stockists In Mexico, Socket Weld Flanges Suppliers In Mexico, Socket Weld Flanges Manufacturers In UAE, Socket Weld Flanges Exporters In UAE, Socket Weld Flanges Stockists In UAE, Socket Weld Flanges Suppliers In UAE

Subordinate upon our ability and ace in this field, we are raised as one of the irrefutable relationship in offering a wide mix of Socket Weld Flanges. This is same like a Slip-on spine in a layout; at any rate the drag is counter-drained to see the pipe. The width of the left over bore is essentially misty as the indoor pipe partition over.

The Socket Weld Flange is near the pipe by an ideal join around the explanation behind blend of the rib. An eager isolated weld may perhaps be utilized as a dash of high weight applications. The best use of such spines is in their most raised weight frameworks, similar to steam and water driven lines.

These Socket Weld Flanges are all around made and its thought is observed by the general quality measures. Our present degrees of finish things are to a noteworthy degree required in the market. We give most raised quality things at sensitive rates.

The Socket Weld Flange is close to the pipe by an ideal join around the motivation driving party of the rib. An unflinching hole weld may conceivably be used as a scramble of high weight applications. The best use of such spines is in their most raised weight structures, like steam and water driven lines.

These Socket Weld Flanges are all around made and the framework for it is ensured by the general quality measures. Our present degrees of complete things are to a superb degree required in the market. We give most raised quality things at delicate rates.

Affiliation Weld spines were from the earliest starting point made for use on immaterial size high weight possessing. Their static quality is indistinguishable from Slip On spines, notwithstanding their weakness quality half more essential than twofold welded Slip On ribs.

The association with the pipe is finished with 1 filet weld, at the outside of the spine. Regardless, before welding, a space must be made between spine or fitting and pipe.

ASME B31.1 1998 127.3 Preparation for Welding (E) Socket Weld Assembly says:

In get together of the joint before welding, the pipe or chamber will be embedded into the association with the best noteworthiness and after that pulled back around 1/16" (1.6 mm) far from contact between the finishing of the pipe and the shoulder of the connection.

The clarification for the bottoming space in a Socket Weld is when in doubt to reduce the holding up worry at the foundation of the weld that could happen amidst setting of the weld metal. The picture shows to you the X measure for the improvement opening.

The drawback of this rib is correct the opening, that must be made. By harming things, and basically in cemented steel pipe frameworks, the split among pipe and rib can give isolating issues. In a couple of frameworks this spine is likewise not permitted. I am not a master in this issue, yet rather on the web, you will locate a bewildering level of data about sorts of usage.

In like way for this rib tallies, that standard for every circumstance from the earliest starting point a pipe must be welded and some time later only a fitting.

Specification of Socket Weld Flanges

Standards: ANSI B16.47 Series A & B, ANSI B16.5, API-605, MSS SP44, ASA, EN1092, BS 4504, DIN
Type: Socket weld Flanges / SWRF Flanges
Size:  ½” (15 NB) to 48″ (1200NB)
 Class : 150 Class, 300 Class, 400 Class, 600 Class, 900 Class, 1500 Class, 2500 Class, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Material: Stainless Steel, Duplex, Super Duplex, Nickel Alloys, Alloy Steel, Carbon Steel, Low temperature Steel
Material Grade:
Stainless Steel Socket Weld Flanges:  ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Duplex & Super Duplex Steel Socket Weld Flanges: ASTM A182 / ASME SA182, F 44, F 45, F51, F 53, F 55, F 60, F 61
Carbon Steel Socket Weld Flanges: ASTM A105 / ASME SA105, ASTM A350 / ASME SA350, ASTM A181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70
Low Temperature Carbon Steel Socket Weld Flanges (LTCS BLRF): Flange, A350 LF2/A350 LF3
Alloy Steel Socket Weld Flanges:  ASTM A182 / ASME SA182 & A387 F1, F5, F9, F11, F12, F22, F91
Nickel Alloy Socket Weld Flanges:  ASTM / ASME SB 564 / 160 / 472, UNS 2200 ( Nickel 200 ), UNS 2201 (Nickel 201 ), UNS 4400 (Monel 400 ), UNS 8020 ( Alloy 20 / 20 CB 3, UNS 8825 Inconel (825), UNS 6600 (Inconel 600 ), UNS 6601 ( Inconel 601 ), UNS 6625 (Inconel 625), UNS 10276 ( Hastelloy C 276 )

MATERIAL GRADE of Socket Weld Flanges

Stainless Steel Socket Weld Flanges –  ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Duplex Steel Socket Weld Flanges –  ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

Carbon Steel Socket Weld Flanges –   ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Low Temperature Carbon Steel Socket Weld Flanges –  Flange, A350 LF2/A350 LF3

Copper Alloy Socket Weld Flanges –  AASTM A105 / ASME SA105, ASTM A350 / ASME SA350, ASTM A181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70

Alloy Steel Socket Weld Flanges –  ASTM A182 / ASME SA182 & A387 F1, F5, F9, F11, F12, F22, F91

Nickel Alloy Socket Weld Flanges –  ASTM / ASME SB 564 / 160 / 472, UNS 2200 ( Nickel 200 ), UNS 2201 (Nickel 201 ), UNS 4400 (Monel 400 ), UNS 8020 ( Alloy 20 / 20 CB 3, UNS 8825 Inconel (825), UNS 6600 (Inconel 600 ), UNS 6601 ( Inconel 601 ), UNS 6625 (Inconel 625), UNS 10276 ( Hastelloy C 276 )